UN08189-ENGINE TIMING TOOL SET FOR VAG-2.4/2.5TDi
Timing Series » VAG/VW/SKODA/AUDI/SEAT
Applications:
Set of engine timing locking tools for use on Volkswagen 2.4D with
engine codes AAB, AJA (02/95-03)
The correct alignment is achieved by placing equal thickness of
shims (D) between both ends of the bracket and the cylinder head
Camshaft Setting Strap (B) is used to set the correct timing position
of the camshaft
The centre Part of the bracket fits into the slotted end of the
camshaft and the ends of the bracket locate on the cylinder head
Injection Pump Pulley Setting Spigot (C) is 15.4mm in diameter
and is used on engines with a one piece Injection Pump Sprocket
The Crankshaft Damper Holding Tool (A) prevents the damper
from rotating whilst unfastening and refastening the centre bolt.
This tool should be used with 3/4”DR power bar
V W GROUP 2.5TDi Common Rail Diesel engines (Belt) in
VOLKSWAGEN
LT Crafter
BJJ, BJK, BJL and BJM engines
A UN081891Crankshaft Damper Holding Tool T10025
B UN081892 Crankshaft Setting Strap 2065A
C UN081893 Injection pump setting spigot 2064
D UN081894 Shims (2) Shim
E UN081895 Tensioner Adjuster
F UN081896 Crankshaft Locking Pin